Top 10 Alfa Romeo 6C 2500 Super Sport Coupe

Brand new in Box!

This item contains a bittering agent. Valvoline ZEREX G-05 antifreeze coolant is a long life, fully formulated, ethylene glycol-based fluid suitable for passenger cars, light trucks and heavy duty vehicles. The formulation is designed for both gasoline and diesel engines. Its lower-silicate, reduced pH, phosphate free European technology protects all cooling system metals, including aluminum, from corrosion. ZEREX G-05 is a nitrite containing coolant designed to protect diesel engine cylinder liners from cavitation. It contains deposit control additives for protection from hard water deposits and scale. The ASTM and other test data shown on this sheet reflect the high performance corrosion inhibitor package. When diluted 50% with water, ZEREX G-05 protects modern engine components from winter freezing and summer boil over. A 50% to 70% concentration range is suggested for optimum corrosion protection. ZEREX G-05 is compatible with other premium brands of coolant commonly available. It contains a high quality defoamer system and will not harm hoses, plastics or original vehicle finishes. It is also suitable for use in Cummins Deere, Detroit Diesel, Mercedes, MTU, CAT, Navistar, Isuzu and Yanmar diesel engines. ZEREX G-05 is approved by Ford North America for newer models. Call 1-800- TEAM-VAL with questions. ZEREX G-05 antifreeze coolant is approved, meets or exceeds the performance requirements of the following antifreeze specifications and/or is recommended: ASTM D3306 Cummins 14603 Approved ASTM D6210 GM 1899M GM 1825M MTU / DDC Approved Mercedes Benz Approved Perkins Diesel CAT EC-1 Mack Paccar TMC of ATA RP-329B Federal Specification A-A-870A Chrysler MS 9769 Approved Ford WSS-M97B51-A1 Approved Detroit Diesel 7SE298 Approved John Deere & Co. Approved GE Wind Turbines Approved Navistar

Red Line 60103-4PK Complete SI-1 Fuel System Cleaner – 15 Ounce, (Pack of 4)

Concentrated, detergent-based fuel additive cleans injectors, carburetors, valves and combustion chamber deposits with a concentrated blend of the most powerful high-temp and low-temp detergents available.

Our tint has a very stable dye and will not bubble, peel, crack, or turn purple. It is manufactured with a substrate that makes for easy application in all kinds of weather. Our tint is backed by a limited lifetime guarantee against fading, peeling, cracking, adhesive failure, and delamination. 40” x 100’ rolls are available on our amazon store https://amzn.to/2t7UCzN

HIGH PERFORMANCE LUBRICATION

This Universal, Self-Healing, Clear Paint Protection Door Cup Kit WILL REQUIRE SOME MODIFICATION TO FIT ON SOME VEHICLES. It is a very durable, self-healing, 8 millimeter thick clear coated urethane film that helps preserve your vehicle’s finish. It helps protect door cups against scratches and scuffs caused by fingernails and rings. It is virtually invisible and clear-coated to help make it resistant to yellowing and staining. Once applied, no special care is required. The application is permanent. After installation, wait 24 hours before taking your vehicle through a car wash. Installation is easy, and we provide detailed installation videos to help make installation even easier. Frequently Asked Questions: Can I use wax over Paint Protection Bra film? Yes. When waxing the vehicle, some wax may build up along the film edges. This can easily be removed when dry with a soft cloth. Do not use any waxes containing dyes or waxes that are not recommended for urethanes. Abrasive polishes and/or rubbing compounds are not to be used. How Clear Paint Protection Bra Film removed? If desired, film can be removed at any time by picking up a corner of the film and pulling the film off the vehicle surface at a 90-degree angle. If the film has been present a long time, or if the film and vehicle are cold, a heat gun or hair dryer may be used to soften the adhesive and making it easier to remove the film. If any adhesive remains on the vehicle after removal of the film, it can be removed by using an auto body adhesive remover. If Paint Protection Film is removed from the vehicle, can it be re-used? No. Once the film has been applied and set, the adhesive will not stick a second time.