Finding your suitable readers for ao smith boat lift motors is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ao smith boat lift motors including detail information and customer reviews. Let’s find out which is your favorite one.
603 reviews analysed
1. Century 3/4 HP Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115 Voltage, Frame 56Z OS2074-1 Each
Description
Energy-efficient motor features extended studs for mounting fan guard on shaft endshield For use in exhaust fans, air circulators, and other air-over fan applications. Motor, Split Ph, 3/4 HP, 1725, 115V, 56Z, Open
2. 3/4 HP Motor Only – TENV (56 Frame)
3. A.O. Smith BN24V1 3/4 HP, 3450 RPM, 1 Speed, 115 Volts, 9.8 Amps, 1 Service Factor, 48Y Frame, PSC, ODP Enclosure, Rigid Base Pool Motor
Description
Century BN24V1 3/4 HP, 3450 RPM, 115v, Single speed 48Y Frame Rigid base Pool motor (Formerly A. O. Smith)
4. 1 HP Motor – TENV W/ Switch, GFCI, & Wire
5. 1 1/2 HP Motor Only – TENV
Description
Direct replacement for all Lunmar boat lifts using a gearbox that has a double belt. 1 1/2 HP AO Smith Motor Only-TENV 56 frame 120/240 volt 50/60 hz Direct Replacment for AMS 8500
6. 1 HP Stainless Steel Motor – TENV W/ Switch, GFCI, & Wire
Description
1HP AO Smith Motor – TENV with: Switch, 125V GFCI, & Wire Direct replacement for AMS 4000.
7. 1 1/2 HP Motor – TENV W/Switch, GFCI, Wire
Description
1 1/2HP AO Smith Motor – TENV with: Switch, 125 GFCI, & Wire Direct Replacement for AMS 8500 boat hoist and Lunmar 15000 aluminum piling mount boat lifts. Upgrades the 6500 Ams hefty hoist to 8500 capacity . 125/250 volt, 50/60 hz, 16 amp, totally enclosed non vented
8. Elite 1 HP Stainless Steel C-Face Boat Lift Motor – Momentary Switch/220v/16 ft. Control Cable
Feature
- IP-55 NEMA Enclosure
- UL Listed / Single Phase, Dual Voltage
- Firs Direct Drive Hoist Shaft Inputs
- Stainless Steel Housing with Shielded Ball Bearings
- Motor Dimensions: 9″ x 10 1/2″ x 6 1/4″
- Horsepower: 1 HP / RPM: 1725
- Voltage: 220v / Amps: 7.8 / Motor Shaft Size: 5/8″
- Phase: 1 / Service Factor: 1.15
- Code: L / Insulation: A / HSG: TENV
- Motor Key Stock Not Included
Description
The Elite 1 HP Stainless Steel C-Face Boat Lift Motor features stainless steel housing with aluminum end-bells, double shielded ball bearings, and dynamically balanced rotors. IP-55 NEMA enclosure rated and UL listed. Totally enclosed, non-venting (TENV) enclosure. Single phase, dual voltage motor with C-Face mounting for direct input units. Motor fits BH-USA A-Drives, Golden Sea-Drives, AMS E-Drives, and all other direct shaft input mounts. Easy to wire directions come standard in the box. Does not work on flat plate belt driven hoists.
Motor features colored T-Wires and each comes with a cross-reference wire chart for all Leeson Electra-Gear motors. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are avaiable but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component.
Dimensions: 9″ x 10 1/2″ x 6 1/4″
Max Run Time: 15 Minutes
Horsepower: 1 HP
Mounting Type: C-Face
RPM: 1725
Service Factor: 1.15
Voltage: 220v
Phase: 1
Amps: 7.8
Herz: 60
HSG: TENV
Code: L
Insulation: A
Shaft Diameter: 5/8″
9. Elite 1 HP Heavy Duty 56 Frame Boat Lift Motor – Maintained Switch / 220v / 16 ft. Control Cable
Feature
- IP-55 NEMA Enclosure / UL Listed
- Single Phase Boat Lift Motor
- Flat-Plate Hoist 56 Frame Mount
- Max Running Time: 15 Minutes
- Mounting Type: C / Voltage: 115/230
- RPM: 1725 / Service Factor: 1.25
- Amps: 7.8 / Herz: 60 / AMB: 40c
- Frame: 56 / HSG: TENV / Code: L / Insulation: A
- Drive Shaft Diameter 5/8″
Description
The Elite 1 HP Heavy Duty 56 Frame Boat Lift Motor features a totally enclosed, non-venting (TENV) enclosure, NEMA enclosure rated, and UL listed. Single phase, dual voltage motor with 56 frame mounting for belt driven flat plate hoists. Compatible with BH-USA, ACE, Hefty Hoist, AMS and American Power Hoist belt driven flat-plate hoists. Easy to wire directions come standard in the box. Does not work on direct drive mount hoists. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are available but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component. Ax Running Time: 15 Minutes Mounting Type: C / Voltage: 115/230RPM: 1725 / Service Factor: 1.25Amps: 7.8 / Hers: 60 / AMB: 40cFrame: 56 / HSG: TENV / Code: L / Insulation: A Drive Shaft Diameter 5/8″
10. Elite 3/4 HP Stainless Steel C-Face Boat Lift Motor – Momentary Switch / 220v / 16 ft. Control Cable
Feature
- IP-55 NEMA Enclosure / UL Listed
- C-Face Direct Drive Input Motor
- Single Phase, Dual Voltage
- Max. Run Time: 15 Minutes
- RPM: 1725 / Service Factor: 1.15
- Voltage: 115/230 / Phase: 1 / Amps: 5.5
- SFtartA: 6.2 / Herz: 60 / AMB: 40c
- Frame: 56 (110) / C (220) / HSG: TENV
- Code: L / Insulation: A
- Drive Shaft Diameter: 5/8″
Description
The Elite 3/4 HP Stainless Steel C-Face Boat Lift Motor features stainless steel housing with aluminum end-bells, double shielded ball bearings, and dynamically balanced rotors. IP-55 NEMA enclosure rated and UL listed. Totally enclosed, non-venting (TENV) enclosure. Single phase, dual voltage motor with C-Face mounting for direct input units. Motor fits BH-USA A-Drives, Golden Sea-Drives, AMS E-Drives, and all other direct shaft input mounts. Easy to wire directions come standard in the box. Does not work on flat plate belt driven hoists. Motor features colored T-Wires and each comes with a cross-reference wire chart for all Leeson Electra-Gear motors. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are available but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component. Ax. Run Time: 15 : 1725 / Service Factor: 1.15Voltage: 115/230 / Phase: 1 / Amps: 5.5SFtartA: 6.2 / Hers: 60 / AMB: 40cFrame: 56 (110) / C (220) / HSG: TENV Code: L / Insulation: A Drive Shaft Diameter: 5/8″
Conclusion
By our suggestions above, we hope that you can found Ao Smith Boat Lift Motors for you.Please don’t forget to share your experience by comment in this post. Thank you!