Nowadays, there are so many products of ao smith combo anode rod location in the market and you are wondering to choose a best one.You have searched for ao smith combo anode rod location in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith combo anode rod location which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
826 reviews analysed
1. Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
Feature
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
Description
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
2. RV Water Heater Anode Rod – Magnesium Anode Rod Suburban Water Heaters Suburban & Morflo – 9.25”Long & 3/4” Thread – Long Lasting Tank Corrosion Protection – 1pc
Feature
- ✓ LONG LASTING QUALITY: Made using high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts, this suburban heater anode rod lasts longer and provides better performance when compared to aluminum heater anode rods ensuring your water heater doesn’t break down anytime soon.
- ✓ PROLONG WATER HEATER LIFE: The anode rod is a crucial part of every water heating system that helps prolong the lifespan of the Water Heater and enhances performance to provide reliable long-lasting use. Our suburban water heaters magnesium anode rod attracts all the contaminants in the water towards itself using electrolysis ensuring your RV water heater provides lasting use.
- ✓ PROTECT HEATERS AGAINST CORROSION: This RV and outdoor water heater anode rod acts as a powerful filter for water being stored in the heater. To protect the metal casing of the water heaters from being worn down by corrosion, our water filter rods enhance the longevity of your water heater. You should gradually check the anode rod to see whether it needs to be replaced.
- ✓ FOR SUBURBAN WATER HEATERS: This water heater tank corrosion prevention rod is 9.25’’ Long and 3/4’’ NPT Thread making it compatible with most RV Suburban and Mor-Flo 6 Gallon Water Heaters. It’s easy to install and replace and provides reliable use. We’ve included a replacement anode rod as well to make it easier for you to switch it when the time comes.
- ✓ 100% CUSTOMER SATISFACTION: To us, customer satisfaction always has and always will be our top priority. Each of our RV Anode Rods are made with our customers in mind which is why we go the extra mile to acquire the finest materials on the market. We’re so confident that you’ll love our Magnesium Anode Rods that we offer a 100% Customer Satisfaction Warranty so that you know you’re making a Risk Free Investment.
3. Camco Aluminum Anode Rod – Extends the Life of Your Water Heater Tank by Absorbing Corrosion Causing Particles – (11582)
4. RV Water Heater Magnesium Anode Rod Set – 2-Piece Kit Water Heater Anode Rods with PTFE Tape – Compatible with Suburban and Mor-Flo Water Heater Tanks – 9.25" Length ¾" NPT Threads
Feature
- WHAT YOU NEED: If you’re using a water heater tank, you should keep in mind that its interior is always subjected to the corrosive action of oxygen and other elements. In order to prolong its life and save your money and time, we offer the perfect solution!
- SAFETY COMES FIRST: These RV water heater anode rods are made from superior quality, extra-durable magnesium guaranteed to withstand the test of time. Unlike classic aluminum zinc rods, our products are 100% for the entire family!
- COMPATIBILITY: These magnesium anode rods are 9.25” long, come with ¾” NPT threads and are compatible with Suburban and Mor-Flo water tanks. The rods use a 1-1/16 inch socket.
- LONGER LIFE: These water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment.
- GREAT DEAL PACKAGE: This practical RV water heater kit includes 2 magnesium anode rods and a BONUS PTFE tape, all set for fixing up your water heater tank and optimizing its functionality!
Description
Small part, Big Impact
Are you tired of spending enormous amounts of money and energy with expensive
fixing procedures of your water tank? Would you like to avoid unpleasant and unforeseen
investments when it comes to your water heating sources? You’ve come to the right place!
Why is this product for you?
This 2-piece anode rod set is made from top-quality magnesium which is non-toxic and entirely
safe for the human body! The high absorption rate of corrosive elements makes it a better choice
than aluminum, keeping your water tank in perfect functioning condition for years. Plus, with
a bonus PTFE tape included, the installation process is easy for anyone
Some of the amazing features of this product:
- Set includes: 2 anode rods, 1 PTFE tape;
- Dimensions: 25″ Length ¾” NPT Threads;
- Uses 1-1/16 inch socket;
- Compatible with Suburban and Mor-Flo models;
- Material: magnesium;
- Safe for humans.
Add to cart now and reap all the benefits this RV Water Heater Magnesium Anode Rod Set has to offer!
5. Blue Lightning 79098 Residental Magnesium Flexible Anode Rod, Hex Plug, 44-Inch
6. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
7. E-SDS Residental Magnesium Flexible Anode Rod for Water Heater,Prevent Corrosion Within your Water Heater,Hex Plug,3/4" Thread,44-Inch Long,0.80" Diameter
Feature
- Corrosion Protection: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- Flexible Design for Tight Areas: The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
- Advantages of Magnesium Anode Rods: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from corroding than Aluminum rods.
- Fits: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.44″ overall length,each section is about 9 1/2″ long.
- Warranty: If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you.
8. STEADY-ROD Aluminum Zinc Hex Head Flexible Anode Rod – 44 inch
Feature
- ELIMINATES ROTTEN EGG ODOR – The rod contains zinc which naturally combats the unpleasant sulfur smell and leaves your water odorless
- UNIVERSAL COMPATABILITY – Manufactured with a 3/4 inch pipe threading to fit all standard water heater anode rod inputs
- EXTENDS LIFE OF WATER HEATER – Safeguards your water heater against premature rusting/deterioration and lengthens the life of your investment
- SUPERIOR ALUMINUM/ZINC ALLOY – This rod contains the optimal blend of aluminim and zinc metals to provide our signature triple defense against water odor, water heater inner-wall rust, and overall premature degradation
- FLEXIBLE TO YOUR NEEDS – Flexible design allows you to easily install even in cramped crawlspaces and closets
9. Reliance 9001829005 32-Inch Magnesium Water Heater Anode Rod
Description
Product description
Reliance 9001829-005 Magnsm Adnode Rod
From the Manufacturer
Anode rods protect the water heater tank from corrosion.
10. Magnesium Flexible Water Heater Anode Rod- Magnesium Anode Rod for Hot Water Heaters, 44 Inch Long, 0.8 Inch Diameter, 3/4 Npt Thread, Including 1-1/16 Inch Hex Socket Tool and Teflon Tape
Feature
- MAGNESIUM ANODE ROD-LONG LASTING USE: This heater anode rod is made of high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts.
- EXTEND SERVICE LIFE OF WATER HEATER: Hot water tanks are made of steel which is very corrosive when exposed to water. Based on the electromotive series of metals we know that magnesium will corrode before the steel in your hot water tank. In this way, it can extend the service life of your water heater.
- ADVANTAGES OF MAGNESIUM ANODE RODS COMPARED TO ALUMINUM RODS: The metallic activity of Magnesium anode rod is stronger than that of Aluminum anode rod. That means Magnesium anode rod is more effective at keeping the water tank from corroding.
- FLEXIBLE DESIGN FOR TIGHT AREAS: This 44 Inch-long magnesium rod is hinged into four segments, less than 12 Inches long each, so it is easy to place it into the tight areas of water heaters.
- KIT INCLUDED: 1) 44 Inch-long magnesium rod, 3/4 NPT Thread makes it compatible with most water heater. 2) 1-1/16″ Hex Socket Tool , help you to replace the anode rod. 3) Teflon Sealing Tape
Description
magnesium anode rod for water heater
Analyzing from a Chemical Perspective, magnesium is more active than aluminum and zinc, so magnesium is more suitable as an anode to protect your water heater.
Besides, Magnesium ions won’t cause any harm to your skin.
Parameters:
Length: 44 inches/ 1100mm
Diameter: 0.8″ /21mm
3/4″NPT thread
Net Weight of the anode rod: 660g
Material: Magnesium
Application:magnesium anode rod for water heater
Packaging List:
Magnesium Anode Rod * 1
1-1/16″ Hex Socket Tool *1
Teflon Sealing Tape * 1 roll
Conclusion
By our suggestions above, we hope that you can found Ao Smith Combo Anode Rod Location for you.Please don’t forget to share your experience by comment in this post. Thank you!
