Finding your suitable readers for ao smith gf2034 home depot is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ao smith gf2034 home depot including detail information and customer reviews. Let’s find out which is your favorite one.
523 reviews analysed
1. Dayton 6K778 Motor, 1/3 hp, Split PH, 1725 RPM, 115 V
2. A.O. Smith GF2034 Century Resilient Base Split Phase Electric Motor, 115 Vac, 6.8 A, 1/3 Hp, 1725 Rpm
3. Grizzly Industrial G2527 – Motor 1/3 HP Single-Phase 1725 RPM TEFC 110V/220V
Description
Made to demanding specifications these motors feature the same quality as the motors we install in our heavy-duty machines. all our motors are standard name 56 frames and fit over 90% of the woodworking machinery on the market. if you have applications where dust oil chip or other foreign particles are the norm rather than the exception you should use the totally enclosed fan cooled motors (enclosed). by popular demand we have added the open drip proof motors (open). these high quality motors are excellent replacement motors for use in relatively clean environments. ideal for drill presses fan and bench machinery all motors are dual voltage (110/220v) capacitor start. they feature standard name 56 frames all ball bearing construction reversible rotation 5/8-Inch shafts and are rated for continuous duty. type: enclosed size: 1/3 hip rpm: 1725 amps at 110v/220v: 6.1/3.1.
4. NEW 2 HP SPL Compressor Duty Electric Motor, 3450 RPM, 56 Frame, 5/8" Shaft Diameter,120/240 VOLT
Feature
- 2 HP SPL COMPRESSOR DUTY ELECTRIC MOTOR, ODP (OPEN DRIP PROOF) FOR DRY INDOOR ENVIRONMENTS
- 1 PHASE, 56 FRAME, 3450 RPM, 120V/240VAC, 5/8″ SHAFT DIAMETER
- CAPACITOR START AND CAPACITOR RUN CONTINUOUS DUTY COMPRESSOR MOTOR
- Amperage: (7.5 FLA @ 240V) (15 FLA AT 120V), Voltage: 120V/240V (NOT SUITED FOR 208V INCOMING)
- CCW (COUNTER CLOCKWISE ROTATION) WHEN VIEWED FROM SHAFT END.
5. A.O. Smith 629002-001 Switch for Single Speed A.O Smith Pumps – 629002-001
6. Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant
Feature
- Contains Teflon, and synthetic fibers for a stronger seal
- For use on natural gas, lp gas, refrigerants, water, fuels, oils, etc.
- Made in United states
- Non-hardening thread sealant containing PTFE plus synthetic fibers
- These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance
- Its low coefficient of friction allows tighter joint makeup with lower torque
- It also breaks out easily without galling, seizing, or damaging threads
- It is excellent for service where immediate pressurization is necessary
- Non-hardening thread sealant containing PTFE plus synthetic fibers
- These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance
- Its low coefficient of friction allows tighter joint makeup with lower torque
- It also breaks out easily without galling, seizing, or damaging threads
- It is excellent for service where immediate pressurization is necessary
7. 1/3hp 1725RPM 48/56Frame 115 volts Belt Drive Furnace Motor Century # GF2034
8. Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
9. A.O. Smith ORM5458 1/3-1/6 HP, 1075 RPM, 208-230 volts, 2 Amps, 48Y Frame, Sleeve Bearing Condenser Motor
Description
Condenser motor, 60 hertz, 60-Degree ambient temperature, auto overload reversible rotation. Common applications are: condensers, heat pumps, refrigeration.
10. A.O. Smith GF2024 Century Resilient Base Split Phase Electric Motor, 115 Vac, 5.4 A, 1/4 Hp, 1725 Rpm
Description
Century Electric Motor, Resilient Base, Split Phase, Century, 115 VAC, 5.4 A, 60 Hz, 1/4 hp Power, Number of Phase: 1, 1725 rpm, 1/2 in Shaft Diameter, 1-1/2 in Shaft Length, Service Factor: 1.35, CW/CCW Rotation Type, Sleeve Bearing, Cradle Mounting, 1-3/8 in Mounting Hole Center, 54 % Efficiency, 40 deg C Ambient, Class B Insulation, Open Drip proof. Split phase motor, 5.4 amps, 60 hertz, auto protector, Sleeve Bearing, 1/2-Inch x 1-1/2-Inch shaft.
Conclusion
By our suggestions above, we hope that you can found Ao Smith Gf2034 Home Depot for you.Please don’t forget to share your experience by comment in this post. Thank you!