Top 10 How To Install Gas Line For Dryer

Product Description

The Eastman 41025 Steam Dryer Installation Kit comes with all the necessary components to install your steam dryer to the water supply. The hoses are built with a PVC core that provides superior strength, multi-filament braided nylon reinforcement, and a clear vinyl outer shell with a 304 braided stainless steel exterior. These supply lines are designed to withstand high pressure and full-flow. The building materials prevent corrosion, kinking and crimping. Equipped with nickel-plated brass nuts and a 90-degree elbow for strain relief and closer-to-the-wall installation.

This high-quality steam dryer kit is durable and reliable for many hours of use. The kit includes: (1) 6-foot fill hose with 3/4-inch female hose thread x 90-degree elbow 3/4-inch female hose thread connection, (1) 1-foot hook up hose with 3/4-inch female hose thread connection x 3/4-inch female hose thread connection, and (1) Y adapter.

From the Manufacturer

Eastman’s Steam-Dryer Installation Kit comes with all the components necessary to install your new steam dryer. Its quality is determined by what you can’t see. The fill hose features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

iPower is the leading manufacturer of grow light systems; supplying gardeners, worldwide, for over a decade. We use the transformative power of light to make gardening more efficient and productive. In addition to HPS/MH and Ceramic MH technology, we offer digital ballasts, fluorescent, and LED lighting systems. From hobbyist to commercial applications, we offer a broad spectrum of gardening tools and equipment in hydroponics, irrigation, climate control, and structures to help your garden thrive.

iPower Ventilation Ducting is made from high quality aluminum to provide flexibility and protect against breaking during installation. Not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations.

Benefits of iPower Ducting:

1. This 4-inch ducting fits any standard 4-inch inline fan.
2. 3-layer thickness: Aluminum Foil + PET + Aluminum Foil.
3. Helically shaped and internally crimped galvanized steel strip.
4. Interlocking steel strips to form an air tight and leak proof system.
5. Each ducting unit includes a pair of metal clamps made from stainless steel.
6. This air duct is easy to cut using a pair of metal snips or a standard wire cutter.
7. This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc.
8. This ducting is made with aluminum reinforced with a spiral-wire, designed to prevent the ducting from unraveling when cut into smaller pieces.
9. Typical applications for ventilation ducting include: dryer room vents, A/C or Heater ducting, grow room ventilation and other indoor gardening applications.
10. 12-month manufacturer warranty.

Product Description

Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.

Stainless Steel Steam Dryer Installation Kit Includes Everything You Need To Install Your Steam Dryer-
6′ Hose (3/4″ FHT x 3/4″ FHT) with 90 Degree Elbow,
Inlet Adapter, “Y” Connector
1 Foot Feed Hose

Product Description

The Samsung LPKIT-3 Liquid Propane Conversion Kit for Gas Dryers facilitates conversion from natural gas to liquid propane fueled, allowing for installation in homes with a liquid propane line.

From the Manufacturer

The Samsung LPKIT-3 Liquid Propane Conversion Kit for Gas Dryers facilitates conversion from natural gas to liquid propane fueled, allowing for installation in homes with a liquid propane line.

72″ Flexible Stainless Steel Gas Appliance Line With 1/2″ OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2″ OD (3/8″ ID) 1/2 MIP x 1/2 FIP – Yellow Coated.

BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.