Top 10 Kegerator Keep Beer Lines Cold

Keep your beer tasting brewery fresh with the this kegerator cleaning kit. This Kit works by removing buildups of bacteria, molds, yeast, and beer stone from your beer lines, faucet, and keg coupler. The Kit comes with a one quart shatter proof bottle and enough beer line cleaning compound for about 17 cleanings. The 5/8″ Nylon Faucet Brush can clean the toughest buildups in your coupler and faucet. The Check Ball Lifter inserts into the bottom of the coupler probe and lifts the check ball, permitting cleaning solution to flow through the coupler when cleaning your system. This saves time by eliminating the need to remove the coupler while cleaning the system. The kit even comes with an extra neoprene washer and faucet wrench in case you lose your originals. A handy instruction manual walks you through the cleaning process and in as little as 15 minutes, you will have a sanitized kegerator, providing you with beer tasting brewery fresh.

Coldbreak jockey boxes are built specifically for the craft beer industry and designed so your beer has 100 percent contact with stainless steel. All shanks, coils, ferrules, and faucets are all made from stainless steel. Beverage line inputs are located on the back of the jockey box, allowing a clean look on the pour side. Perfect for any environment where individuals are self pouring (weddings, parties, banquets, etc.) or when Breweries need a lot of taps in a small space. Beverage jumpers and CO2 equipment sold separately (dispensing kits).

SPECIFICATIONS:

Size: 3/16″ Inside Diameter 7/16″ Outside Diameter

• Working Pressure: 30 PSI
• Burst Pressure: 90 PSI
• Working Temperature: 23°F – 176°F
• Suits most barbed fittings and connectors
• Cost Effective, Non Toxic, and BPA-Free
• For chemistry and lab experiments
• Mini fountain
• Dishwasher fittings
• Spa fittings
• Blow off tube
• Potable water
• Low pressure air line

Also available in the following lengths (Please see corresponding ASIN):

• 10 Feet: B017EA5ST6
• 25 Feet: B01HDNNYPO

*Upgraded 1/2″ connector and hose allow more airflow than the standard 3/8″ hose and connector used on our standard tower cooler, providing MAXIMUM cooling. COLDTOWER KEGERATOR TOWER COOLERS are the all around BEST tower coolers you can buy!!! They cool your beer tower, ELIMINATING EXCESS FOAM, and making even the first beer of the day ICE COLD. When you want your house or car as COLD as possible, what do you do??? BLAST the AC!!! Same idea with your beer tower!!! I have constructed and tested many different designs in my years of producing tower coolers, and have found the most important factor in cooling a beer tower is the rate of airflow into it. Our tower coolers are equipped with POWERFUL 34 CFM BLOWERS which BLAST COLD AIR into your beer tower!!! The combination of the blower being so powerful and the fact that it blows DIRECTLY into the air hose (as opposed to a computer box fan, like you will find on my competitor’s products. They blow some air into the hose, but most of it is lost, blowing against the wall of the box) enables our units to cool a beer tower better than any other tower coolers on the market. During my tests, I found the 34 CFM blower resulted in tower temperatures 20-25° lower than when using a computer box fan. The end result??? COLDER BEER and LESS FOAM!!! The COLDTOWER is powered by a 12 VOLT, highly efficient power supply, and is equipped with a switch on the power cord, so you don’t have to open the kegerator door to turn the unit on and off. The switch enables you to turn the unit off when you are not drinking, saving on the life of the blower and your electric bill. The blower is powerful, yet very quiet, and will cool your tower in just a few MINUTES when switched on. It will also EASILY cool a dual tap tower. If you are not completely satisfied with your Coldtower, we will refund 100% of your money within 90 days of your purchase! Full 1 year warranty against defects on all units bought after 1-1-2017 (tower cooler only.)

The Coldpour 2 kegerator tower cooler draws cold air from the bottom of the kegerator and pushes it into the beer tower. This helps prevent the beer from warming/foaming up in the line. It also helps keep the entire kegerator at a more even temperature.

Draft faucet cap sanitary cover – tap soother. You probably do not really want to know about all of the things that can get up inside the spout of a draft faucet. Let’s just say that fruit flies are probably the more tame beasties that can get up in there and taint your beer. Sanitation and hygiene are a life style in the beer world but in a home draft system beer faucets are an inconspicuous place that people rarely think about. Most individuals are pretty good about regular line cleaning, and I’m sure most kegerators out there are pretty spotless, however it is all of the time between uses where small amounts of beer residue inside of the tap spout can remain after pouring your prized brew. This leftover beer will attract insects and harbor bacteria, so the next time you pour a few, that beer might not be so pristine. So what do we do about it? That is where the tap soother comes in! We recommend keeping a spray bottle of sanitizer in your bar (like star san from 5 star chemicals). When you are ready to shut the bar down for the night, just give the inside of your faucet a little spritz of sanitizer then slip on your faucet cap. The cap will keep the insides of your faucet spout nice, clean and bug free until you are ready to pour another beer. Another advantage to these faucet caps is that they can help prevent dried beer from sicking your faucet shut. The best way to keep faucets clean and sanitary. Protects faucets from insects and bacteria that can get into the spout of your faucet. Simple and effective works with nearly all types and brands of draft faucet including Perlick. An essential part of draft faucet hygiene.

Don’t leave your draft beer taps defenseless against pesky fruit flies! The tap soother is a simple and affordable way to stop the all too common problem, before it starts. In addition to eliminating the tiny yet obnoxious pests, you’ll create a more sanitary environment and also prevent your faucet from sticking. The tap soother also helps to control the yeast and bacteria build-up inside and outside of your draft tap. You might think it’s a simple idea but in reality it’s a seriously effective solution. You’ll wonder how you ever served beer without it. In stock and ready to ship. Features: fits both domestic and European faucets. Made from food safe, durable rubber. Controls yeast and bacteria problems.

Our beer kegerator tower cooler is designed to cool the beer tower on your home kegerator, a direct draw type draft beer system. With a direct draw system, the beer keg is stored in a refrigerator or cooler right below the beer tower. The number one complaint about any direct draw home kegerator is your first 1/2 glass of beer is always foamy. The reason for this is simple – the beer faucet & shank inside your beer tower get warm between glasses and cause your foamy beer. And the solution is less than 5 minutes away – just install our Beer Tower Cooler! Our tower cooler works by continuously blowing a small volume of cold air into your beer tower and the cold air keeps your beer shanks and faucets ice cold. A side benefit is the continuous cold keeps faucet mold and bacteria growth inside your beer faucet at an absolute minimum. Our tower cooler ships with everything pictured – completely assembled beer tower cooler, zip tie to tie your tower cooler to your beer lines and high quality 1 Amp 12VDC Energy Star power supply.Air flow is all about your fan rating and the hose diameter you are pushing air through. Our ¾” ID diameter hose flows more air to your beer tower than the competition’s “upgraded” ½” diameter hose no matter what they claim their fan’s CFM is, plus their ridged air hose offers even more air flow resistance.

Beer Tap Plug Brush, Beer Faucet Brush Plugs